EasyWring™ RinseClean™ Spin Mop System

Revolutionize the way you mop your floors, with clean water every rinse. The EasyWring™ RinseClean™ Spin Mop features an innovative 2-tank bucket system that separates the dirty water from the clean water for a thorough cleaning experience. Equipped with a built-in foot pedal and bucket wringer, the hands-free system also includes a powerful microfibre mop head that removes over 99% of bacteria with just water.*

HANDS-FREE

All Hard floors

WITH WATER

CONTINUOUSLY CLEAN WATER

RinseClean™ is Real Clean

Separates clean & dirty water

2-tank bucket system ensures you clean with clean water while mopping

Hands-free wringing

Our built-in foot pedal allows for easy hands-free wringing and desired level of moisture without having to bend over

Removes +99% bacteria with just water*

Our mop heads use the magic of microfibre to remove over 99% of bacteria with just water* - use your favourite floor cleaner or just water

Sabine B., R&D Engineer

“Working on the EasyWring™ RinseClean™ Spin Mop System has shown me how important our consumers are in constantly helping us improve our products. We heard their cleaning concerns, and so we made an easy-to-use product that ensures you continuously clean with clean water.”

FEATURES


  • Separated clean & dirty water tanks, so you use clean water while mopping.
  • The 100% microfibre mop head removes over 99% bacteria with just water*.
  • Easy hands-free wringing for the desired level of moisture without having to bend over. Spin wringing is activated with a high-quality foot-pedal.
  • The mop’s triangular head design easily cleans deep in corners and under furniture.
  • Machine washable, easy-to-replace refill.
  • Telescopic handle to adjust the height and extend reach.
  • Ideal for all types of floor – wood, tile, laminate and linoleum.
 

USE & CARE


  • Machine or hand wash mop head. Do not use fabric softener or bleach. Lay flat to dry. For best results, change refill every season.
  • Store bucket in dry conditions. Do not expose to excessive sunlight.

Yes, the mop refill is machine washable at 60°C / 140°F and is reusable.

  • To get started, wet the mop in the Clean Water rinsing chamber, wring out using foot pedal activated wringer and clean the floor.
  • After mopping a section of the floor, insert and swish the dirty mop in the Clean Water rinse chamber. The microfibre mop head will absorb all the clean water from this chamber.
  • Move wet mop to the wringer to spin out the dirty water into the bucket below.
  • Clean water will automatically refill the rinse chamber for a fresh clean every time.

The red triangle-shaped frame and connector on the refill is smaller than the EasyWring version, however the actual microfibre mop strings are longer to provide the same great cleaning performance with improved maneuverability to reach into tight spaces.

The RinseClean™ mop is unique to the RinseClean™ Spin Mop System. For mop head replacement, be sure to purchase the blue and white refills which are especially designed for the RinseClean™. The standard white mop refills are made for the EasyWring™ only and do not fit in the RinseClean™ Spin Mop System.

A full clean water tank can clean up to 860 square feet / 80 m². The full clean water tank holds 6 litres of water.

The RinseClean™ Spin Mop System is ideal for all hard floors*, including wood flooring, tile, laminate and linoleum (*excludes unsealed floors).

The easy, hands-free wringer allows you to spin the mop to the desired level of moisture without having to bend over or get your hands wet.

Yes, the RinseClean™ Spin Mop System is ideal for all hard floors*, including wood flooring, tile, laminate and linoleum (*excludes unsealed floors).

When mopping wood floors, spin the mop a couple more times for less water when mopping.

The easy, hands-free wringer allows you to spin the mop to the desired level of moisture without having to bend over or get your hands wet.

Ensure the red lever is closed (pressed down) when filling or cleaning the clean water tank. Use water when cleaning out the tank. When cleaned, empty all remaining water out of the tank by tilting it upside down and pouring the last of the remaining water out from the filling hole. Once rinsed and empty, opening both the red lever and blue cap can help dry out any remaining drops in the tank.

RinseClean™ Spin Mop System is compatible with household floor cleaning detergents. Simply add detergent after filling the clean water tank with max. 6 litres of tap water. Always check the dosing instructions of the chemical detergent you’re using.

Fully extended, the handle is 48 inches or 123 cm long.

A full clean water tank holds a volume of 6 litres.

The bucket measures (Length x Breadth x Height) 19” x 12” x 12” Inches or 49 x 30 x 30 cm

*Removes over 99% of common household bacteria such as E. coli and Staph. aureus from pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab.

**Rinsing chamber fills continuously with clean water.”