Use & Care: RinseClean™ Spin Mop System
Enjoy a cleaner, fresher way to mop with the Vileda RinseClean Spin Mop & Bucket System. Featuring a dual-tank design that separates clean and dirty water, this innovative system ensures every rinse uses fresh water for a deeper, more hygienic clean. The hands-free foot pedal allows you to control moisture with ease, while the triangular microfibre mop head removes over 99% of bacteria with just water. Safe for all sealed hard floors, including hardwood, tile, and laminate, RinseClean delivers superior results with less effort and cleaner water every time.
FAQS
Vileda products are available in most mass retail stores, grocery stores, hardware stores and online. Click here to access our full list of retailers.
We are committed to providing top-quality products to our consumers. Vileda products are warranted against defective materials or workmanship for 1 year from the date of purchase. For all questions about product warranties, please contact Vileda Customer Care Team for assistance.
Some individual parts for Vileda products can be obtained directly from us. Please contact our Customer Care Team by filling out the form on this page.
Microfibre is a highly absorbent material that is excellent at removing tough dirt and grime. Vileda microfibre mop heads are machine-washable.
Vileda microfibre mop heads are made up of millions of tiny fibres. These ultra thin microfibres catch dirt efficiently. When used with water, all these fibres loosen and physically pick up dirt and remove over 99% of bacteria without the use of harsh cleaning chemicals. Our microfibre removes the two most common household bacteria, E. coli and Staph. Aureus, from pre-finished hardwood flooring and ceramic tile, using tap water, as tested at an independent accredited lab.
We recommend changing your mop head refill every 3 months, however this also depends on your cleaning routine/how often you mop. A simple reminder is to change your refill every season. PRO TIP: Keep an extra refill handy so you are always ready for the next mess.
Streaks are caused by a residue of a chemical that is left on the floor. Make sure you follow the instructions from the cleaner you are using so that it is not too concentrated and never use fabric softener when washing the refills.
The red triangle-shaped frame and connector on the refill is smaller than EasyWring, but the actual microfibre mop strings are longer to provide the same great cleaning performance with improved maneuverability to reach into tight spaces.
Rinse and drain the clean water tank after each use. Air dry by leaving the blue fill cap and red flow valve open.
It’s easy to use your Vileda spin mop and bucket system. Just fill the bucket with water (we recommend 6L), add cleaning solution if you like (try our Vileda PACS for an easy no-measure cleaning solution!) and dunk your mop head into the bucket. To wring out excess moisture, lift the mop head from the bucket and insert into the circular wringer. Holding the handle loosely, pump the foot pedal 5 to 7 times to control the water level of your mop.
Mop starting at the furthest point in the room, so you don’t mop yourself into a corner. Use a figure-eight pattern when mopping.
When you’re finished mopping, you can toss your mop head into the washing machine, wash, and use again! Lay it flat to dry.
For more specific information on how to use the EasyWring spin mop system, click here.
For more information on how to use the RinseClean spin mop system, click here.
*Removes over 99% of E. coli and Staph. aureus from pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab
Mop starting at the furthest point in the room, so you don’t mop yourself into a corner. Use a figure-eight pattern when mopping.
When you’re finished mopping, you can toss your mop head into the washing machine, wash, and use again! Lay it flat to dry.
For more specific information on how to use the EasyWring spin mop system, click here.
For more information on how to use the RinseClean spin mop system, click here.
*Removes over 99% of E. coli and Staph. aureus from pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab
The Vileda RinseClean spin mop uses a patented two-bucket system to separate clean and dirty water. Genius! The top compartment holds clean water, while the bottom compartment holds dirty water.
To get started, make sure the red tab on the top blue bucket is all the way closed. Next fill the opening in the blue bucket with water (and cleaning solution, opt for Vileda PACS for an easy floor cleaning solution!). Pull up the red tab to dispense the water into the bucket, and dunk your mop. Keep the tab open while mopping. The bucket auto-refills after each soak! To wring out the excess moisture, move your mop head into the wringer. Holding the handle loosely, use the foot pedal to wring out your mop. The excess water is dispatched into the bottom bucket.
To see more, check out this how-to video.
To get started, make sure the red tab on the top blue bucket is all the way closed. Next fill the opening in the blue bucket with water (and cleaning solution, opt for Vileda PACS for an easy floor cleaning solution!). Pull up the red tab to dispense the water into the bucket, and dunk your mop. Keep the tab open while mopping. The bucket auto-refills after each soak! To wring out the excess moisture, move your mop head into the wringer. Holding the handle loosely, use the foot pedal to wring out your mop. The excess water is dispatched into the bottom bucket.
To see more, check out this how-to video.
Shop RinseClean Spin Mop System and Replacement
RinseClean™ Spin Mop & Two Bucket System
RinseClean™ Spin Mop Head Replacement
How to Use Your EasyWring RinseClean Mop
- Fill the clean water tank to the indicated line with fresh water.
- Dip the mop head into the clean water section to wet the microfibre strands.
- Place the mop in the wringer and press the foot pedal to spin out excess water.
- Mop your floors, starting in corners and working outward.
- Rinse and spin again as needed — the dirty water collects separately, keeping your mop water clean from start to finish.
How to Replace the RinseClean Mop Head
-
Remove the old mop head
- Place the mop flat on the floor.
- Step lightly on the mop strands to hold the head in place.
- Pull the handle upward to detach the mop head from the base — it will snap off easily.
-
Attach the new mop head
- Align the plastic base of the new Vileda RinseClean mop head with the mop frame.
- Press down firmly until you hear a “click” to secure it in place.
-
Check the connection
- Tug gently on the mop head to make sure it’s locked in properly before use.
-
Ready to clean
- Your RinseClean mop is now ready for use.
- Remember to machine wash the refill regularly to maintain optimal performance and hygiene.
Care & Maintenance Tips
- Machine wash the microfibre mop head in warm water and air dry between uses.
- Avoid fabric softeners and bleach to preserve the mop’s cleaning power.
- Empty and rinse both tanks after use to prevent buildup or odours.
- Store the mop and bucket in a dry area.
- Replace the mop head every 3–6 months for best cleaning performance.
Why It’s a Smart Choice
The Vileda RinseClean Spin Mop brings innovation and hygiene together in one smart design. Its two-bucket system keeps clean and dirty water separate, ensuring a fresher, more sanitary mopping experience. The pedal-powered spin wringer eliminates manual effort, while the machine-washable microfibre mop head reduces waste and costs. Perfect for homes that prioritize cleanliness and convenience, RinseClean transforms everyday floor care into a faster, cleaner, and eco-friendlier routine.
Need Help?
Categories
About Vileda®
Where To Buy
Follow us
